Designed for the 'Stock' classes. These gears feature a self-lubricating material, molded-in 'thru' holes, and higher revving tooth design.
Designed for the 'Stock' classes. These gears feature a self-lubricating material, molded-in 'thru' holes, and higher revving tooth design.
Hyper-Rev Gears - Purple
$4.50 each
5 for $21.00
10 for $40
Designed for the Modified classes. These gears feature a super tough material, molded-in 'thru' holes, and higher revving tooth design.
Designed for the Modified classes. These gears feature a super tough material, molded-in 'thru' holes, and higher revving tooth design.
Hyper-Rev Gears - Orange
$6.25 each
5 for $30.00
10 for $57.50
Designed for the 'Stock' classes. These gears feature a self-lubricating material, molded-in 'thru' holes, and higher revving tooth design.
Designed for the 'Stock' classes. These gears feature a self-lubricating material, molded-in 'thru' holes, and higher revving tooth design.
Hyper-Rev Gears - Grey
(While Supplies Last)
(Replace by Purple Gears)
$2.25 each
5 for $10.50
10 for $20
Features 3 each of 21t, 22t, & 23t gears, in the Purple & Orange materials, at a reduced cost. 18 total gears!
Features 3 each of 21t, 22t, & 23t gears, in the Purple & Orange materials, at a reduced cost. 18 total gears!
Hyper-Rev Starter Pack
$90.00
Hyper-Rev MEGA Pack
$120.00
Features 3 each of 21t, 22t, 23t, 24t & 25t gears, in the Orange material, and 3 each of the 21t, 22t, and 23t in the purple material, at a reduced cost. 24 total gears!
Features 3 each of 21t, 22t, 23t, 24t & 25t gears, in the Orange material, and 3 each of the 21t, 22t, and 23t in the purple material, at a reduced cost. 24 total gears!
This pinion is for all stock motor classes. It features a durable, self-lubricating nylon material with a pushed-back collar to assist with proper gear mesh of larger diameter crown gears.
This pinion is for all stock motor classes. It features a durable, self-lubricating nylon material with a pushed-back collar to assist with proper gear mesh of larger diameter crown gears.
Hyper-Rev 7t Nylatron Pinion
$1.55 ea - or -
10 for $15.00
This pinion is best in Modified and CMPM classes. It features an extremely durable fiber reinforced, self-lubricating nylon material with a pushed-back collar to assist with proper gear mesh of larger diameter crown gears.
This pinion is best in Modified and CMPM classes. It features an extremely durable fiber reinforced, self-lubricating nylon material with a pushed-back collar to assist with proper gear mesh of larger diameter crown gears.
Hyper-Rev 7t Hardened Pinion
$2.05 ea - or -
10 for $19.00
Just like the Hyper-Rev Gears, these gear bosses are the first to be mass produced with 'through' to reduce the rotational mass & improve performance! They're made from a high quality delrin for durability as well as having a low coefficient of friction. The Gear Boss is mirrored on both sides, so it does not matter how you install it. Of course, they're designed to work with my Hyper-Rev Gears & Pinions, but will work well with Jag Pinions, Tyco Pinions, Quicker Gears, BSRT Gears and others.
Just like the Hyper-Rev Gears, these gear bosses are the first to be mass produced with 'through' to reduce the rotational mass & improve performance! They're made from a high quality delrin for durability as well as having a low coefficient of friction. The Gear Boss is mirrored on both sides, so it does not matter how you install it. Of course, they're designed to work with my Hyper-Rev Gears & Pinions, but will work well with Jag Pinions, Tyco Pinions, Quicker Gears, BSRT Gears and others.
Hyper-Rev Ultra Lightweight Gear Boss
$2.25 ea - or -
10 for $21.00
Firm Compound for Spec Racer Cars, with excellent corner grip. Will not tear easily when removing!
Firm Compound for Spec Racer Cars, with excellent corner grip. Will not tear easily when removing!
Hyper-Rev Slip-On Rear Tires
$3.50 pr - or -
5 pr for $17.00
The set includes a .0465 drill blank front axle, a pair of the ALL New CNC Machined Hyper-Rev Front Rims, and a pair of retainers.
The set includes a .0465 drill blank front axle, a pair of the ALL New CNC Machined Hyper-Rev Front Rims, and a pair of retainers.