These are 20° stock replacement brushes for the Wizzard Fusion Hood System. These beautiful brushes feature a race-proven silver compound for great conductivity, less arcing, a cleaner comm, and thus more power! The brushes are also manufactured with 20° Advanced timing, a full flat bottom/top surface (no need for the extra stabilizer), an offset notch to ensure spring pressure is applied in the proper place, a longer ‘footprint’ so the brush is less likely to tilt and rob you of power, and a
These are 20° stock replacement brushes for the Wizzard Fusion Hood System. These beautiful brushes feature a race-proven silver compound for great conductivity, less arcing, a cleaner comm, and thus more power! The brushes are also manufactured with 20° Advanced timing, a full flat bottom/top surface (no need for the extra stabilizer), an offset notch to ensure spring pressure is applied in the proper place, a longer ‘footprint’ so the brush is less likely to tilt and rob you of power, and a
Hyper-Volt 20° Silver Brushes
$4.00 for 1 Pair
$19 for 5 Pair
$37 for 10 pair
hese springs are made of Beryllium Copper, and have been lightly heat treated. They provide excellent and consistent brush tension to the motor. The legs have been left a little long for those that wish to experiment with different bends to the brush. For best results, lay the spring over the Fusion Hood Spring Post, and then install the Fusion Brush Spring Holder upside-down over top of the spring.
hese springs are made of Beryllium Copper, and have been lightly heat treated. They provide excellent and consistent brush tension to the motor. The legs have been left a little long for those that wish to experiment with different bends to the brush. For best results, lay the spring over the Fusion Hood Spring Post, and then install the Fusion Brush Spring Holder upside-down over top of the spring.
Hyper-Volt Fusion Brush Springs (Single or 3 Coil)
$1.75 for 1 Pair
$8.50 for 5 Pair
$16.50 for 10 pair
$20.00 for 10 Pair & Jig
These Spring Holders are designed with Grooves in them to hold the spring in the proper position for best pressure against the motor brush. Please specify which spring type you buying them for, RPMs Single Coil, or Wizzard Stiff Spring.
These Spring Holders are designed with Grooves in them to hold the spring in the proper position for best pressure against the motor brush. Please specify which spring type you buying them for, RPMs Single Coil, or Wizzard Stiff Spring.
Hyper-Volt Fusion Brush Spring Holders
$3.00 for 1 Pair
$13.00 for 5 Pair
$25.00 for 10 pair
Trim & Bend Your Hyper-Volt Springs
Trim & Bend Your Hyper-Volt Springs
Hyper-Volt Fusion Brush Spring Jig
$5.00
Designed as a replacement for Viper or G style cars. These shoes are slightly shorter in length, much lower profile, made from a burn-resistant material, strengthened to increase life, and require no tweaking.
Designed as a replacement for Viper or G style cars. These shoes are slightly shorter in length, much lower profile, made from a burn-resistant material, strengthened to increase life, and require no tweaking.